1 / 8

ALLOLO · Red light therapy

ALLOLO Red Light Therapy Belt | 12.6″ × 6.3″

70 LEDs12.6 × 6.3″ light area

$89.00

660 nm red and 850 nm near-infrared light in a flexible, wired belt. Choose your wavelength, intensity and session time on the connected controller.

660 nm
850 nm
210 LED chips

Choose your model

Compare sizes

70 LEDs12.6 × 6.3″

112 LEDs16.7 × 7.9″

180 LEDs39 × 7.7″

280 LEDs27.6 × 13.9″

405 LEDs32.7 × 15.7″

Quantity

Not available to purchase yet

Wired controllerAdapter included5–30 min timer

70 three-chip LEDs 660 nm red + 850 nm near-infrared

4 intensity levels Plus 10 Hz pulse mode

Six timer settings 5–30 minutes via wired controller

Adjustable fit 23.6″ strap + 31.5″ extension belt

Included with your device

Red light pad, adapter, wired controller with a 120″ USB cable, 31.5″ extension belt, organizer, packaging box and instruction manual.

Power & fit

Wired USB power is required during use. Use the included adapter or a compatible USB supply; a power bank is not included. Follow the supplied manual for positioning and use.

Questions about this model? Contact ALLOLO

Product overview

ALLOLO 70 LED red light belt

An adjustable, USB-powered wrap with 70 three-chip LEDs combining 660 nm red and 850 nm near-infrared light. The wired controller offers four intensity levels, Pulse and six timer settings. An adapter and extension belt are included.

Light area: 12.6 × 6.3″
LED chips: 210
Timer settings: 5–30 min

ALLOLO 70 LED belt placement guide. Adjust the 23.6-inch elastic strap for the arm, knee or wrist. Add the included 31.5-inch extension belt for the waist, lower back or shoulder. Photographs show all six placements.

Inside every LED

Three chips.
Two wavelengths.

Each of the 70 LED beads brings together one 660 nm red chip and two 850 nm near-infrared chips.

70660 nm red chips

140850 nm near-infrared chips

Illustration of a three-chip LED on a red-lit circuit board

Control preview

Wavelength660 + 850 nm

OutputLevel 2

Timer15 min

Visible red light and invisible near-infrared light work together.

01Choose the wavelength

02Choose a level or Pulse

Four intensity levels, plus a separate 10 Hz Pulse option.

03Set your timer

Light beneath the surface

How the two wavelengths travel

Both enter through the skin. Their wavelength influences how light spreads and how much energy remains as it travels inward.

Relative reach / closer to the surface

Skin texture & collagen

660 nm red light is absorbed as it moves through the skin, with more energy remaining near the surface. Clinical research with 660 nm light has reported improvements in skin texture and collagen-related measures.

Skin texture researchCollagen research

Read the 660 nm study

Light interaction / relative illustration